研究领域

暂无内容

论文成果

• 王京涛. 基于DeepSeek大模型的特种加工课程教改探究——激光电化学复合去材机理实验
• 王京涛. Anodic dissolution and passivation mechanisms of 07Cr16Ni6 in K3Cit solution and its electrochemical machining for microstructure
• 王京涛. Anodic dissolution behaviors of GH4049 superalloy in NaNO3 and NaCl solutions and its electrochemical machining for film cooling hole
• 王京涛. Anodic dissolution behavior and microstructure preparation of nickel based superalloy in cryogenic-shielded and laser-assisted electrochemical machining
• 王京涛. Investigation of electrolyte intermittent commutation effects on electrochemical machining
• 王京涛. Electrochemical dissolution behavior of 07Cr16Ni6 alloy in sodium nitrate solution
• 王京涛. Corrosion Properties and Passive Film Interface of Inconel 718 in NaNO3 Solution for Laser-Assisted Electrochemical Machining

专利

暂无内容

著作成果

• Electrochemical dissolution behavior of Inconel 718 alloy in NaNO3 solution A comparison between wrought and cast
• Investigation of electrolyte intermittent commutation effects on electrochemical machining
• Electrochemical dissolution behavior of 07Cr16Ni6 alloy in sodium nitrate solution
• Corrosion Properties and Passive Film Interface of Inconel 718 in NaNO3 Solution for Laser-Assisted Electrochemical Machining

科研项目

• 镍基高温合金复杂型面激光电解复合加工 , 2025/04/08
• 2025年江苏省青年科技人才托举工程项目 , 2025/09/19
• 机器视觉控制的分块电极自调节电解加工装置及方法等2件专利 , 2025/12/04
• 难加工材料电解加工装备研制与技术推广应用 , 2024/01/12 -2025/11/10
• 叶片前后缘冷态流体约束激光电解自耦合脉动态加工机制研究 , 2025/08/30
• 低温约束下叶片前后缘激光电解脉动态协同加工机理研究 , 2024/07/10 -2026/06/30