江苏大学主页平台管理系统王安东--中文主页--论文成果

个人信息

MORE +

王安东

教授

硕士生导师
学位：博士
性别：男
学历：博士研究生毕业
所在单位：材料科学与工程学院

同专业硕导

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

王安东. 预混合法和预合金法制备Cu-Sn粉末的显微组织和烧结性能
王安东. Flexible Thermoplastic Polyurethane Composites with Ultraviolet Resistance for Fused Deposition M...
王安东. Carbon Fiber-Reinforced PLA Composite for Fused Deposition Modeling 3D Printing
王安东. Electro-Assisted 3D Printing Multi-Layer PVDF/CaCl2 Composite Films and Sensors
王安东. Hot deformation behaviours and spheroidization mechanisms of Ti-5322 alloy during hot compression
王安东,Lv, Jinjuan. Enhanced Electrical Properties of PVDF Thin Film by Addition of NaCl by Near-Electric-Field 3D Pr...
王安东. 双时效工艺对SLM成形GH4169合金组织与拉伸性能的影响
王安东. Preparation and properties of antibacterial PVDF composite thin films
王安东. 热处理对低Re镍基单晶高温合金组织的影响
王安东. 固溶时效处理对Ti-5322钛合金组织与性能的影响
王安东. Orthogonal Anisotropic Sensing and Actuating Characteristics of a 1-3 PZT Piezoelectric Microfibe...
王安东. Enhanced beta-Phase in Direct Ink Writing PVDF Thin Films by Intercalation of Graphene
Lv, Jinjuan,王安东. Effect of aging-deformation-treatment on the formation of intragranular ferrite in V-microalloyed...
Caifeng Chen, Chenkang Shao and Andong Wang. Chemical exfoliating of boron nitride into edge-hydroxylated nanosheets. Journal of Materials Science. 2023,58 (10):4416–4427
Andong Wang, Jianhua Liu, Chenkang Shao, Youming Zhang and Caifeng Chen. Electro-Assisted 3D Printing Multi-Layer PVDF/CaCl2 Composite Films and Sensors. Coatings. 2022,12 (6):820
Caifeng Chen, Mingwei Shao, Kai Liu, Wuwen Zhong, Iala Djassi and Andong Wang. Enhanced Thermal and Electrical Properties of Photosensitive Resin Matrix Composites with Hexago.... Journal of Inorganic and Organometallic Polymers and Material. 2023,33 :319–327

共28条 1/2

首页上页下页尾页页

个人信息

王安东

同专业硕导

论文成果

王安东. 预混合法和预合金法制备Cu-Sn粉末的显微组织和烧结性能

王安东. Flexible Thermoplastic Polyurethane Composites with Ultraviolet Resistance for Fused Deposition M...

王安东. Carbon Fiber-Reinforced PLA Composite for Fused Deposition Modeling 3D Printing

王安东. Electro-Assisted 3D Printing Multi-Layer PVDF/CaCl2 Composite Films and Sensors

王安东. Hot deformation behaviours and spheroidization mechanisms of Ti-5322 alloy during hot compression

王安东,Lv, Jinjuan. Enhanced Electrical Properties of PVDF Thin Film by Addition of NaCl by Near-Electric-Field 3D Pr...

王安东. 双时效工艺对SLM成形GH4169合金组织与拉伸性能的影响

王安东. Preparation and properties of antibacterial PVDF composite thin films

王安东. 热处理对低Re镍基单晶高温合金组织的影响

王安东. 固溶时效处理对Ti-5322钛合金组织与性能的影响

王安东. Orthogonal Anisotropic Sensing and Actuating Characteristics of a 1-3 PZT Piezoelectric Microfibe...

王安东. Enhanced beta-Phase in Direct Ink Writing PVDF Thin Films by Intercalation of Graphene

Lv, Jinjuan,王安东. Effect of aging-deformation-treatment on the formation of intragranular ferrite in V-microalloyed...

Caifeng Chen, Chenkang Shao and Andong Wang. Chemical exfoliating of boron nitride into edge-hydroxylated nanosheets. Journal of Materials Science. 2023,58 (10):4416–4427

Andong Wang, Jianhua Liu, Chenkang Shao, Youming Zhang and Caifeng Chen. Electro-Assisted 3D Printing Multi-Layer PVDF/CaCl2 Composite Films and Sensors. Coatings. 2022,12 (6):820

Caifeng Chen, Mingwei Shao, Kai Liu, Wuwen Zhong, Iala Djassi and Andong Wang. Enhanced Thermal and Electrical Properties of Photosensitive Resin Matrix Composites with Hexago.... Journal of Inorganic and Organometallic Polymers and Material. 2023,33 :319–327