- 2024-08-05
Yao, Qing,王匀.液黏离合器径向沟槽摩擦片热力特性分析
- 2024-08-05
王匀.贫油润滑条件下H13模具钢表面微凹坑几何参数的优化研究
- 2024-08-05
Tan, Zhongrui,王匀.汽车C柱内板上段拉延成形工艺优化
- 2024-08-05
Chen, Liyu,王匀.一种非线性扩散与图像差分的金属表面缺陷检测方法
- 2024-08-05
王匀,Chen, Liyu.薄壁钢筒温挤压成形工艺优化
- 2024-08-05
Tan, Zhongrui,王匀.Effect of Surface Roughness of AISI8630 on Microstructure and Corrosion Resistance of Inconel625 ...
- 2024-08-05
Chen, Liyu,Tan, Zhongrui,王匀.Numerical simulation of cavitation behavior and peening experiments in cavitation peening process....Institute of Physics Publishing
- 2024-08-05
Jiang, Zhigang,Chen, Liyu,Tan, Zhongrui,王匀.Velocity analysis of oil film between friction pairs in hydro-viscous drive clutch.Institute of Physics Publishing
- 2024-08-05
Yao, Qing,王匀,Chen, Liyu,Tan, Zhongrui.基于改进粒子群算法的车辆被动悬架优化与仿真研究
- 2024-08-05
Tan, Zhongrui,王匀,Jiang, Zhigang,Chen, Liyu.表面织构在脂润滑条件下的摩擦性能研究
- 2024-08-05
Chen, Liyu,Tan, Zhongrui,Yao, Qing,Jiang, Zhigang.薄壁钢筒温成形模具磨损规律及机理
- 2024-08-05
Tan, Zhongrui,Chen, Liyu,Yao, Qing,Jiang, Zhigang.基于金属流线分析的三柱槽壳温挤件工艺优化
- 2024-08-05
Jiang, Zhigang,Chen, Liyu,Yao, Qing.State-of-the-art in Impact Bar with High Performance
- 2024-08-05
Yao, Qing.4032铝合金花盘锻压成形技术
- 2024-08-05
小孔内壁热丝TIG堆焊Inconel625参数优化研究
- 2024-08-05
Jiang, Zhigang.Ammonium sulfate and PEG composite surfactant to promote dispersibility of precursors and Y2O3 po...
- 2024-08-05
Yao, Qing.Isobam assisted slurry optimization and gelcasting of transparent YAG ceramics
- 2024-08-05
Jiang, Zhigang.圆形电连接器跌落冲击分析及改进设计
- 2024-08-05
Yao, Qing.基体表面粗糙度对热丝TIG堆焊Inconel625组织和耐腐蚀性能的影响
- 2024-08-05
尹研,王匀.基于激光填丝熔覆的Cr12MoV模具修复及性能表征